1/1/2023 0 Comments Xbox 360 320gb hddss bin 80gb![]() ![]() I personally think hacking a 500gb drive is now best value for money. This guide will show you how I did that, its worth mentioning that you can also hack a 20gb, 60gb and 120gb, 250gb, 320gb and 500gb drives, however when creating this tutorial 250gb was the largest drive possible to hack. I think doing your own drive is the way to go as Microsoft charge £89.99 just for the 120gig drive here in the UK, at that price I could make 3x 250gig drives for the same price! I purchased a nice 250gb laptop hard drive for £30 and used hddhackr on it to enable the 360 to use it. Simply follow this tutorial and download the security sector that matches the size of the hard drive you wish to hack.Īfter having a 20gb drive for the last 4 years and getting annoyed about having to constantly delete stuff I did something about it. This tutorial focuses on hacking a 250gb drive, which was the largest drive possible in 2009 when i created this tutorial, however it is now possible to hack drives of the following sizes: 500gb, 320gb, 250gb, 120gb, 60gb and 20gb. Normally you can only use Microsoft approved hard drives which are significantly more expensive, costing up to 3x the price of a normal 2.5" SATA hard drive. This will use the undo.bin file you created before to restore the drive to its original state.This tutorial will teach you how to hack a standard Western Digital 2.5" Sata hard drive so it can be used by the Xbox 360 and Xbox 360 Slim. If you don’t want to use your modded WD in your x360 anymore and you want to flash it back to its original size, then you can now do so. If so, connect it to your x360 and go to your dashboard/system/memory where you should be able to format the drive. It should now tell you that the drive should work in your x360. Shut down your pc, reboot again to dos and again type ‘hddhackr -f’. This will create an ‘undo.bin’ file that you need if you want to undo the hack. It will ask if you want to create an undo file. Type ‘hddhackr -f’ from the same path you have saved the hddss.bin file to. Now turn off your PC and connect the Western Digital and boot to dos again. This will create a file ‘hddss.bin’ and it will save it to the path you’ve started the hddhackr from. Make sure it is the only SATA device that is connected. Connect an *original* xbox 360 HDD to your SATA controller. If you don’t have one, here’s how to create one from a valid xbox 360 HDD:īoot to dos from a writeable medium (like a floppy). To use this tool, you need a HDD security sector file (‘hddss.bin’). * How to use: Get yourself a Western Digital SATA BEVS HDD. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |